Ceramic-containing welding protection spray does not contain silicone and max. It creates a smooth and protective film layer. The product is applied to the nozzle before welding. In this way, it extends the life of the nozzle and prevents the formation of burrs. It prevents long-term adhesion of welding spatters during plasma and laser cutting. Usage: Before starting to use, the box must have taken the current heat inside. Shake the can well for approximately 1 minute before use and between each spray. Spray on the cold duct from a distance of about 10-15 cm and let it dry for about 60 seconds. After this process, welding can be started. After use, turn the can upside down and spray until the tip is clean.
Art. No: W150148
400 ml - red
It is an insulating varnish that forms a water-resistant protection layer and is resistant to bad weather conditions and corrosion. It meets DIN 53482 standard with its high insulation value. Especially suitable for hard-to-reach places. It can be used in repair and maintenance workshops of electronic products, furniture repairs and hobby purposes (works of art, model making, sports, hand tools, etc.).
Details
Art. No: W150158
500 ml
Synthetic rubber based spray contact adhesive with very high adhesion strength.
Details
Art. No: W170121
500 ml
Thanks to its special content, it cools the applied surfaces up to -50°C in a short time. In cases where urgent intervention to hot parts is required, it shortens the repair time and saves time by rapidly cooling the part. Can be used in industrial areas and electronics.
Details
Art. No: W180006
6 markers - red
Details
Art. No: W180003
6 markers - blue
Details
Art. No: W180002
6 markers - black
Details
Art. No: W150303
400 ml - white
Prevents welding burrs from sticking to the surface and torches in MIG/MAG welding and all kinds of plasma and laser cutting.
Details
Art. No: W140616
25 l
Welding protection with excellent separation properties, especially developed for welding processes in container, wagon and shipbuilding.
Details
Art. No: W180001
6 markers - white
Details
Art. No: W150306
500 ml - white
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
Art. No: W150304
500 ml - black
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
Art. No: W150154
400 ml
Formulated as mould release agent in plastic injection moulds. It ensures that metal and plastic are separated from each other without any problem.
Details
Art. No: W150157
IMPA. CODE: 450603
400 ml
Developed for the maintenance of flat, axial and V-belts made of all PVC, rubber and leather. It feeds the belt, reduces noise and keeps the belt on the pulley axis.
Details
Art. No: W150147
IMPA. CODE: 450842
400 ml
It is applied to the area to be welded from the front and prevents the burrs that occur during welding from sticking to the surface.
Details
Art. No: W150305
500 ml - gray
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
Art. No: W150308
500 ml - transparent
It is a protective rubber spray that can be used to fill leaks and cracks.
Details
Art. No: W150140
400 ml
The product forms an anti-static surface on plastic, metal, leather and wood surfaces. The protective layer formed is resistant to corrosion and moisture. It is used as a lubricant in rails, conveyor belts, hinges, sliding bearings, etc. It is a good separator especially for plastic and metal forms. It has a protective effect against ageing in plastic and rubber parts and seals.
Details
Art. No: W150149
400 ml - transparent
It is an insulating varnish that forms a water-resistant protection layer and is resistant to bad weather conditions and corrosion. It meets DIN 53482 standard with its high insulation value. Especially suitable for hard-to-reach places. It can be used in repair and maintenance workshops of electronic products, furniture repairs and hobby purposes (works of art, model making, sports, hand tools, etc.).
Details
