Weapon maintenance oil is a multipurpose spray lubricant. It protects, lubricates and cleans equipment against corrosion. It facilitates the disassembly of rust locked parts. Typically ideal for trouble-free operation of springs and mechanisms of rifles, pistols, etc. Method of Use: After shaking the can for 2 minutes, spray from a distance of 15-20 cm.
Art. No: W150204-18
18 kg
It is a food approved grease used for lubrication and corrosion prevention in parts in contact with food. Transparent and odourless.
Details
Art. No: W150205-16
16 kg
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
Details
Art. No: W150151
400 ml
It is a special oil formulated to remove nicotine, soot and dirt from surfaces such as rubber, plastic and PVC.
Details
Art. No: W150212-25
25 kg
NSF H1 approved fully synthetic silicone oil developed for food industry. It has high thermal resistance and excellent resistance to water and water vapour.
Details
Art. No: W160110
IMPA. CODE: 450821
400 ml
Mineral-based 5-function spray lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
Art. No: W140609-SET5
5 l
The mineral-based 5-function lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
Art. No: W150210-1
1 kg
Silicone grease used for filling and lubrication in the combination of plastic, metal and rubber materials. It is odourless. Delays dirt and moisture, reduces noise.
Details
Art. No: W150223
1 kg
It is a special high speed grease with synthetic base oil and barium complex soap. It exhibits a long-lasting performance especially in equipment parts operating under aqueous, variable, impact and vibrating loads.
Details
Art. No: W160101
IMPA. CODE: 450565
400 ml - copper
Spray assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant against water, petrol, oil, grease and gases.
Details
Art. No: W160124
400 ml
Thanks to the graphite and special substances it contains, it has high adhesion and strength to withstand the toughest conditions.
Details
Art. No: W150202
IMPA. CODE: 450891
1 kg - copper
It is an assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant to washing with pressurised water.
Details
Art. No: W150210-100
100 ml - transparent
Details
Art. No: W150206
IMPA. CODE: 450526
1 kg
General purpose bearing grease containing EP additives and lithium soap. Resistant to water washing. Provides long-term lubrication where applied. Minimises corrosion and wear. Ideal for lubrication of systems operating under extreme pressure, heavy and vibrating loads.
Details
Art. No: W150217
1 kg
Significantly reduces friction with its rich MoS2 content. It is successfully used in equipment operating under heavy load and where friction wear causes problems. Ideal for moving parts in industry, automotive and textile industry.
Details
Art. No: W150224
1 kg
It is a grease with lithium soap and white solid lubricant content formulated with quality base oils and specially developed additives.
Details
Art. No: W160100
IMPA. CODE: 450846
400 ml - gray
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
Art. No: W160104
IMPA. CODE: 450578
400 ml
It is a black coloured grease that provides good adhesion to the surface under difficult conditions such as pressure and friction.
Details
Art. No: W150211-25
25 kg
Silicone grease used for filling and lubrication in the combination of plastic, metal and rubber materials. It is odourless. Delays dirt and moisture, reduces noise.
Details
Art. No: W160171
400 ml
Details
Art. No: W170119
500 ml(370g)
Details
Art. No: W150212-1
1 kg
NSF H1 approved fully synthetic silicone oil developed for food industry. It has high thermal resistance and excellent resistance to water and water vapour.
Details
Art. No: W600540
30 l
Provides effective lubrication by penetrating into the metal on the applied surface. Prevents corrosion, jamming, bimetal corrosion and noise problems. Does not migrate from the applied surface, has an upper resistance temperature of +250°C. It is especially ideal for high speed chains and ropes.
Details
Art. No: W150213
1 kg
It is a calcium sulphonate complex oil developed especially for the steel industry. It is formulated to lubricate bearings and bearings exposed to heavy loads and high temperatures under wet conditions.
Details
Art. No: W150204-1
1 kg
It is a food approved grease used for lubrication and corrosion prevention in parts in contact with food. Transparent and odourless.
Details
Art. No: W160114
IMPA. CODE: 450835
500 ml
It is a semi-synthetic, spray and salt water resistant lubricant with adhesive grip.
Details
Art. No: W160125
400 ml
It is a grease containing high quality compounds and Lithium base. It has a wide range of applications and good chemical stability.
Details
Art. No: W150218-16
16 kg
In addition to its multi-purpose use, it is also used as assembly paste, lubricant and separating agent at high temperatures. Compared to similar products, the molybdenum disulphide content is much higher.
Details
Art. No: W140609-30
30 l
The mineral-based 5-function lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
Art. No: W160105
400 ml
NSF H1 approved lubricant for processes in direct contact with or processing food. Provides safe and effective solution thanks to its special and approved formulation. It extends the service time especially in expensive equipment under the risk of wear due to friction.
Details
Art. No: W160109
IMPA. CODE: 450832
400 ml
It is a spray product that provides dry film lubrication in equipment with sliding friction. Thanks to MoS2 additive, it reduces friction in systems operating under heavy load. For best results, it is important that the application surfaces are clean and dry.
Details
Art. No: W160121
500 ml
Details
Art. No: W160119
IMPA. CODE: 450828
500 ml
Prevents sticking and abrasion, reduces noise caused by friction. It is the ideal lubricant for all equipment in the food industry that wears due to friction and decreases efficiency.
Details
Art. No: W160115
IMPA. CODE: 450826
400 ml
Forms a flexible protection layer against corrosion. Resistant to abrasion and pressure. Resistant against water and moisture. It produces a solution that does not jam and collect dirt in moving mechanisms where greases cause problems. Prevents bimetal corrosion. Especially ideal for gear mechanisms, chains, etc. moving equipment. With its excellent penetration effect, it penetrates into the centre of the chain link and provides homogenous lubrication.
Details
Art. No: W150222
1 kg
High Performance Grease is a combination of high temperature resistant lithium complex soap and highly refined mineral oils. Formulated with high viscosity base oils, it has a high load carrying capacity.
Details
Art. No: W150200
IMPA. CODE: 450884
1 kg - off white
It is an excellent assembly paste enriched with ceramic particles. Water repellent, excellent adhesion to surfaces. It gives excellent results on joints, bearings, chain systems, pressurized devices, etc. exposed to high temperature and pressure.
Details
Art. No: W160108
IMPA. CODE: 450833
400 ml
Suitable for metals as well as engineering plastics. Metal free. Resistant to salt water and steam thanks to its lithium content.
Details
Art. No: W160111
200 ml
Weapon maintenance oil is a multipurpose spray lubricant. It protects, lubricates and cleans equipment against corrosion. It facilitates the disassembly of rust locked parts.
Details
Art. No: W150220
IMPA. CODE: 450483
400 ml
It is a general purpose bearing grease that provides safe and long-lasting lubrication under heavy loads and reduces friction and wear.
Details
Art. No: W150221
400 ml
NSF H1 approved spray lubricant suitable for use in food processing equipment. It penetrates the surfaces very well and repels water and moisture from the surface. Provides protection against rust and corrosion. It has a good level of lubricity.
Details
Art. No: W150225
1 kg
Molybdenum Paste WDR 450 is a dark grey multipurpose assembly paste with a high content of graphite and molybdenum disulphide, designed for high temperature use.
Details
Art. No: W160126
500 ml
Mineral-based 5-function spray lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
Art. No: W160122
400 ml
Contains methyl siloxane (silicone oil), colourless and odourless. It has excellent lubrication, insulation and protective properties on many different materials.
Details
Art. No: W150217-16
16 kg
Significantly reduces friction with its rich MoS2 content. It is successfully used in equipment operating under heavy load and where friction wear causes problems. Ideal for moving parts in industry, automotive and textile industry.
Details
Art. No: W150219
IMPA. CODE: 450874
1 kg - gray
It is a heavy metal and silicone free metal additive mounting paste. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
Art. No: W160112
IMPA. CODE: 450607
500 ml
Silicone spray lubricant with good release and lubrication properties. Repels moisture, protects elastomer materials against freezing. Prevents sticking and abrasion, reduces noise caused by friction. It can also be used as a mould release agent.
Details
Art. No: W150218
1 kg
In addition to its multi-purpose use, it is also used as assembly paste, lubricant and separating agent at high temperatures. Compared to similar products, the molybdenum disulphide content is much higher.
Details
Art. No: W150211
1 kg
It is a calcium sulphonate complex oil especially developed for the steel industry. It is formulated for high temperature lubrication of plain and roller bearings subjected to heavy loads in environments with water.
Details
Art. No: W150130
IMPA. CODE: 450825
400 ml
It is a colourless, PTFE-containing dry film lubricant for metal, rubber, plastic and other materials. Ideal for applications where grease cannot be used due to pollution and aesthetics. Suitable for use in the electrical, plastics, textile and automotive industries
Details
Art. No: W160200
IMPA. CODE: 450847
400 ml - off white
It is a heavy metal and silicone free spray mounting paste with metal additives. It provides excellent protection against fresh-salt water, steam, gas, acid, solutions and petrol.
Details
Art. No: W160110-200
200 ml
Mineral-based 5-function spray lubricant protects against corrosion - lubricates, stops unwanted noise, cleans, dissolves rust and repels moisture. Thanks to its special formula and versatility, it can be used in many applications. It is ideal for lubricating hinges and guides, opening rust-locked connections, cleaning electronic devices from water and moisture, etc.
Details
Art. No: W160116
IMPA. CODE: 450829
400 ml
Cleaning and maintenance of chain systems is ideal for construction. Superior penetration to the centre of the surfaces to which it is applied with its ability It moves towards and provides effective lubrication. Water and resistant to moisture. Bimetal corrosion prevents Especially periodic, such as forklift chains chained equipment that needs to be maintained maintenance and service life is used to extend it.
Details
Art. No: W150201
IMPA. CODE: 450891
500 g - copper
It is an assembly paste containing fully synthetic lubricant and copper particles. Prevents interlocking of moving parts operating under high temperature and pressure. Resistant to washing with pressurised water.
Details
